How To Choose The Right Used Injection Molding Machines
Are you looking for the right used injection molding machine to
use in the production of plastic products in your business? Since there are
many varieties of used plastic machinery on the market, you need to know how to
separate the good from the bad and choose the most suitable one for your
production needs. The following are some of the factors you should take into
consideration when looking for the right machine to buy.
Shot size is one of the things that you should
definitely pay attention to when you are looking for the right used injection molding machines to
buy. This is best defined as the maximum amount of plastic that the injection
molding machinery can inject into the molding cavity during one molding cycle.
The amount is rated in ounces of GPPS for U.S. machines, and cm3 for European
and Asian machines. Before you settle for any machine, it is good to check if
it is capable of producing 30 to 40 percent greater shot sizes compared to what
your parts require.
Another factor you should consider when
looking for a good used plastic injection molder to buy is ejector stroke. This
is the action of the machine pushing out (ejecting) the final workpiece from
the platens using ejector pins. The ejector in the injection molder pushes
against an ejector plate on the mold. Ejector pins or rods are attached to this
plate and perform a pushing operation on the molded part after the plastic has
hardened and the mold has opened.
After the action of molding the workpiece is
completed, the mold opens and then the ejector pins slowly extend outwards,
pushing finished part out of the mold cavity. The pin movement is timed with
the mold opening, since the pins that move too quickly could impact the plastic
workpiece and damage the final product and pins that move too slowly may not eject
the molded part fully.
For
more tips on how to choose the right used injection molding machines, visit
our website at https://www.premierplasticsnj.com/
Comments
Post a Comment