How To Choose The Right Used Injection Molding Machines
With so many used injection molding machines being
sold on the market, choosing the right one for your business needs can be a
challenging task. You cannot just walk in a shop and buy any used machine you
come across. You need to make sure that the machine you want to buy is in good
working condition.
There are a number of factors you should pay
attention to as you look for the right used injection molding machine to
buy. One of them is ejector stroke. Simply put, ejector stroke is the action of
the machine pushing out the final workpiece from the platens using ejector
pins. The ejector in the molding machine pushes against an ejector plate on the
mold. Ejector pins or rods are attached to this plate and perform a pushing operation
on the molded part once the plastic has hardened and the mold has opened.
After the action of molding the workpiece is
completed, the mold opens and then the ejector pins slowly extend outwards,
pushing the finished part out of the mold cavity. The pin movement is timed
with the mold opening since the pins that move too quickly could impact the
plastic workpiece and damage the final product while the pins that move too
slowly may not fully eject the molded part.
You also need to check the tonnage of the used injection molding machines
you want to purchase. This refers to the clamping pressure that the equipment
delivers. The number of tons that a used injection molder is capable of
producing when pressing the platens together is how experts measure tonnage.
Make sure that it is enough to meet your company’s production needs.
For
more tips on how to choose the right used injection molding machines, visit
our website at https://www.premierplasticsnj.com/
Comments
Post a Comment