How To Choose The Right Used Nissei Injection Molding Machines
Buying used Nissei injection molding machines may
be a good alternative if you want to get into the business of manufacturing
plastic products buy cannot afford a brand new machine. If you take time to
look for the used machine, you can get one that can serve you just as good as a
brand new. The followibg are some of the factors that you should take into
consideration when looking for the used injection molders.
Shot size is one of the important factors to
consider when looking for the right used
Nissei injection molding machines to buy. This is the maximum amount of
plastic that the injection molding machine can inject into the molding cavity
during one molding cycle. The amount is rated in ounces of “general purpose
polystyrene” (GPPS) for United States machines, and cm3 for European and Asian
machines. To be on the safe side, you should choose a machine that is capable
of producing 30 percent or 40 percent greater shot sizes than what your parts
require.
Another factor that you should take into
consideration when looking for the right used injection molding machines to
buy is clamp tonnage or clamping pressure. This could be considered the same
concept as when examining press brakes. With press brakes, the tonnage
capabilities are usually measured by the number of tons downforce the machine
can direct towards a workpiece. But with plastic injection molding machines,
tonnage is usually measured by the number of ton with which the machine is
capable of pressing together the platens, which hold the mold cavity and form
the plastic that is then injected into said cavity to produce the desired plastic
product.
For more tips on how to choose the right used
Nissei injection molding machines, visit our website at https://www.premierplasticsnj.com/
Comments
Post a Comment