Mistakes To Avoid When Buying Used Nissei Injection Molding Machines
Selecting
the right used Nissei injection
molding machines is one of the most important criteria for creating
efficient machining parts constantly and beneficially. This being a second-hand
machine purchase, you need to look for a machine that will keep prices low and
make you goo profit. The following are some of the mistakes that you should
avoid if you do not want to end up with the wrong machine.
First
and foremost, do not make the mistake of choosing a used Nissei injection
molding machines that uses all-purpose screws. The primary benefit of
all-purpose screws is that they can be used with most plastic materials, such
as PP, PE, PET, PC and nylon. For this
reason, they are very adaptable and good for the molding companies that
manufacture a wide range of materials. However, for a few materials, the
component types as well as the efficiency rates of the all-purpose screws will
be lesser compared to more superior injection casting screw designs, such as the
barrier screw.
Another
mistake you do not want to make looking for the right used Nissei injection
molding machines to purchase is choosing large screw diameters. Sometimes, big
screw diameters can lead to poor quality problems due to material
degradation. When small shot sizes are
used with big screw thickness, the plastic material takes a lot of time to get
warmed by the barrel heaters as compared to large shot sizes.
Material
degradation is more likely to happen if the shot size is smaller compared to
the maximum shot capacity of the injection unit, particularly for heat
sensitive materials. Another issue with
large screw thickness is the big shearing forces that are produced during screw
rotation. These shearing forces can break down the material and lead to reject
parts.
For more information on the
mistakes to avoid when buying used Nissei injection molding machines, visit our
website at http://www.premierplasticsnj.com
Comments
Post a Comment