How To Get The Most Out Of Used Injection Molding Machines
When
buying used injection molding machines, there are a number of issues you need
to be aware of so as to minimize production problems that are associated with
second-hand or refurbished molds. Among the production problems that are you
are likely to experience with used injection molders include slow cycle times,
poor part quality, molding below full activation as well as constant machine
stoppages because of poor part ejection.
Before
you part with your money to pay for used injection molding machines, you should
assess their condition properly. Used plastic injection molders are likely to
be in poor condition that can result into broken tie bars, worn out platens and
broken toggle pins. Machine damage does not show up at once. It may initially
show up as part quality problems or mold balancing issues.
In order
to get the most out of the used
injection molding machines that you will purchase, you should ask to see it
producing samples in person or by video link. By doing so, you will get an
accurate idea of the machine’s cycle time as well as the current part quality
issues. Better yet, you can have the machine shipped to your factory so that
you can test it yourself.
Another
thing you can do in order to get the most out of used injection
molding machines is ask for the latest samples from all cavities. Take time
to weigh each sample and measure the wall thicknesses. The information that you
will get from this will give you an accurate picture of the condition of the
injection molder. Any large variation in the cavity weights or wall thicknesses
can result into immediate production problems.
If the
used injection molding machine you want to purchase has a cold runner, request
for the runner sample. You need this in order to accurately measure the shot
size. Measure the thickness of the runner and compare it to the part wall thickness.
If the runner is too thin, it would be difficult for you to mold quality parts.
For more
tips on how to get the most out of used injection molding machines, check out: http://www.premierplasticsnj.com/
Comments
Post a Comment