Mistakes To Avoid When Buying Used Plastic Injection Molding Machines
If you are planning to start a plastic manufacturing
company, one of the primary things you will need to purchase is an injection
molding machine. Also referred to as an injection molder, this machine will
help you manufacture plastic products easily using a process known as the
injection molding process. If you are low on budget, buying a new injection molder
can be quite expensive. The good news is that there are used plastic injection
molding machines that can do a good job just as new ones provided that you
choose them properly.
For you to be able to choose the right used plastic
injection molding machines, there are various mistakes you will need to avoid.
The first mistake is buying injection molders that do not work. The key to
purchasing a reliable used injection molder is to find one that is fully
inspected and tested before being delivered to you. If you make the mistake of
buying a used machine that is not functional, you will suffer loss of
production as a result of multiple breakdowns. So make sure that the used
injection molder you want to purchase is thoroughly tested before being
delivered to your company even if the seller promises that it is in good
working condition.
Another mistake you should avoid when buying used
plastic injection molding machines is selecting large screw diameters. Such
screws can lead to quality problems due to material degradation. When they are
used with small shot sizes, the plastic material is forced to spend more time
being heated by the barrel heaters. Material degradation will most likely occur
if you use shot sizes that are smaller compared to the maximum shot capacity of
the injection unit especially for heat sensitive materials. Large screw
diameters are also notorious for creating large shearing forces during screw
rotation, something that can in turn degrade the material and lead to reject
parts.
You should also avoid the mistake of purchasing an injection
molder that uses general purpose screws. Even though these screws can be very
advantageous when used with most plastic materials such as PE, PP, PET, PC and
nylon because of their flexibility, they are not good for materials. They can
lead to lower part quality and productivity rates compared to more advanced
screw designs like the barrier screw.
It will also be a huge mistake to buy used plastic injection
molding machines that have limited injection pressure. If you want to be able
to make quality parts consistently, you need to make sure that the molding
process is not limited by the injection pressure. You need to have at least ten
percent injection pressure in reserve so as to allow the injection molder to
automatically adjust to normal variation in the plastic material viscosity.
When the injection pressure is insufficient, the moldings that will be produced
can be shorter or defective.
For more tips
on how to purchase used plastic injection molding machines, visit our website
at http://www.premierplasticsnj.com/
Comments
Post a Comment